Autoscommunity
Motion & Emotion

Lamborghini Squadra Corse Unleashes the SC20

1,571

Lamborghini Squadra Corse presents the SC20, a unique specimen of an open-top track car type-approved for road use. The SC20 is the second one-off engineered by the motorsport department and designed by Centro Stile in Sant’Agata Bolognese: the car was created following the customer’s wishes, who was involved the project from the very first drawings by Lamborghini’s designers.

The common goal was to build a unique vehicle, extreme in its design and performance, and combine aerodynamic solutions taken from racing Lamborghinis incorporating unprecedented lines and exclusive details.

Lamborghini SC20

“Two years after the SC18 Alston, the SC20 was a new, intriguing challenge. The chief sources of inspiration were the Diablo VT Roadster, Aventador J, Veneno Roadster and Concept S, and the result is a dramatic combination of creativity and racing attitude,” commented Mitja Borkert, Head of Design Lamborghini Centro Stile.

The carbon fibre body was polished and slicked down by hand by the Lamborghini aerodynamic engineers to deliver optimal airflow for both performance and the cockpit’s occupants, ensuring comfortable open-air driving even at high speeds. Two fins frame the pronounced front splitter, and the air intakes on the front hood are inspired by those of the Huracán GT3 EVO, while the sculpted body sides reflect the solutions adopted on the Essenza SCV12. The muscular rear is topped by a large carbon fibre wing set in three different positions: Low, Medium and High Load.

Do You Know?
  • Lamborghini was founded by Ferruccio Lamborghini.
  • Lamborghini’s were originally tractors.

Lamborghini SC20 Front View

The SC20 features exclusive details starting from the body colours on a Bianco Fu (white) base, created for the customer, on which the Blu Cepheus (blue) livery stands out. The same shade is found in the interior, alternating with Nero Cosmus (black) and Bianco Leda (white). The most significant element of the passenger compartment is the visible carbon fibre used for the dashboard cover, rear wall, door panels, centre console and steering wheel trim, in addition to the monocoque. Carbon fibre is also used for the shells of the seats upholstered in Alcantara and leather. The door handles, on the other hand, are machined from solid aluminium. Lastly, the air vents are created using 3D printing technology at the Sant’Agata Bolognese factory.

Maurizio Reggiani, Chief Technical Officer of Automobili Lamborghini, stated, “The SC20 is a combination of sophisticated engineering, Italian craftsmanship, sportiness and advanced design. It is also an example of applying our V12 engine and carbon fibre to a radical open-top vehicle that unmistakably carries the Lamborghini DNA.”

Its engine is based on Lamborghini’s flagship V12: the 6,498 cm3 aspirated twelve-cylinder that delivers 770 CV at 8,500 rpm and develops 720 Nm of torque 6,750 rpm. It is managed through the optimized seven-speed Independent Shifting Rod (ISR) gearbox. The power is discharged to the ground by the four-wheel-drive system with central electronic differential. The Pirelli PZero Corsa tires are mounted on single-nut aluminium rims, 20 inches in front and 21 inches at the rear.

Lamborghini SC20 Rear View

Giorgio Sanna, Head of Lamborghini Motorsport, commented, “The SC20 is one more technical and styling exercise that associates Squadra Corsa experience with Lamborghini design, masterfully interpreted by our Centro Stile based on the customer’s wishes, which was the focus of the project during the entire vehicle development and construction process.”

NEXT UP IN NEWS

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More