This 20P Pre-MOT Check Could Save Motorists £200

Motorists have been told how using a twenty pence piece to check tyres before an MOT test could save them hundreds of pounds. Motoring experts have revealed seven pre-MOT checks to prepare a vehicle for the test and save on hefty repair bills. 

The annual MOT test inspects a vehicle to check it is roadworthy, safe and meets legal safety standards.

While the initial maximum cost for a car MOT is £54.85, owners must pay for hefty repairs, retests and labour costs if a vehicle fails.

The costs for a single replacement tyre alone can be as high as £250, while mechanic hourly rates can reach £80.

But motorists can perform simple checks to reduce the risk of an MOT fail, including checking tyre tread using the 20p test and topping up all fluid levels.

Jake Smith, director of Absolute Reg, said: “MOTs can work out much more expensive than the initial test cost if motorists don’t prepare their vehicle beforehand.

“With the cost of living crisis and rising fuel and insurance costs, driving is expensive enough,  so motorists must know how to keep costs down in this annual test.

“Simple checks beforehand can help keep repair bills down and get vehicles through the test without hefty charges.

“Ensuring tyre tread depth is at the legal limit with the coin test and replacing flickering or blown bulbs will save time and money on test day.”

These are Absolute Reg’s seven must-know pre-MOT checks:

1. Tyre Tread Depth

The legal tread limit for tyres is 1.6mm, and motorists can check if tyres are sufficient by putting a 20p coin into the main tread grooves. If the outer rim of the 20p is visible when performing the test, the tyres should be replaced ahead of the MOT.

2. Tyre Pressure

Underinflated tyres could fail an MOT, so ensure they are at the recommended pressure, which should be on a sticker on the bodywork or in the vehicle handbook.

3. Lights

All car lights must work for a vehicle to pass the test, including the headlamps, registration lights, indicators, parking lights and registration plate bulbs. Ensure they are replaced before the test if blown, and consider tightening or replacing any flickering.

4. Fluid Levels

Pop the bonnet and ensure all fluid, like the brake reservoir, screen wash and oil, is topped up to sufficient levels.

5. Seatbelts

All seat belts will be inspected, so damaged or frayed seat belts that don’t work properly must be replaced as they are an essential safety component thoroughly checked.

6. Windscreen Cracks

Damage to a windscreen larger than 10mm in front of the driver and 40mm outside the area will lead to a test fail. Ensure cracked or chipped windscreens are replaced before inspection.

7. Fuel

Ensure the fuel tank has been filled up because MOT testers can turn away vehicles with an empty tank or if the fuel light is on.

To find out more about the current laws and rules concerning vehicles, please visit https://absolutereg.co.uk/news/number-plate-rules-the-law.